Shark Vacuum Won’t Turn On

I’m sure you must have experienced your shark vacuum not turning on. While this can be frustrating, it is also a relief to hear that it is a very common problem. In this post, you will learn about why your shark vacuum won’t turn on and learn the methods you should use in troubleshooting. 

There are so many factors why your shark vacuum won’t turn on.  There are some you can fix by yourself while there are others you need to attention of Shark Support Centre or a vacuum engineer.

Read Also: Best Vacuum For Your Luxury Vinyl Plank Floors

 

This is a list of why your shark vacuum won’t turn on.

Damaged Power Switch

When your shark vacuum won’t turn on, then check the power button. A damaged power button will prevent your shark vacuum from turning on. 

Solution: A replaced power button can easily solve this problem. By changing it to a new one, your shark vacuum will turn on.

Clogged Filters and Blockages

Your shark vacuum won’t turn on because there is so much debris trapped on the inside of your vacuum. The vacuum can sometimes trap dirt, hair, and pet dander which end up clogging the filter and may in turn lose suction and will prevent it from turning on. 

Read Also: German Made Vacuum Cleaners

Solution: You need to take out your vacuum to 

Incorrectly Plugging in Your Shark Vacuum 

You must check if your shark vacuum is correctly plugged in. An incorrectly plugged-in vacuum will not turn on. You need to check if this vacuum is steadily fixed on the power socket. 

Solution: Check the socket in which your shark vacuum was plugged in. 

Faulty Power Outlet

After you have tested to see if your vacuum was incorrectly plugged in, you must check for a faulty power socket. Your shark vacuum won’t turn on when you plug it into a damaged power outlet.

Solution: Test your vacuum using another power outlet and see if it turns on. You can also test other appliances on that same socket to see if those appliances will work. If they don’t work, then you have a case of a faulty power socket. But if these tests do not make your shark vacuum turn on, then the problem will be from the vacuum itself.

Overheated Motor

Your shark vacuum may get overheated as a result of prolonged use or when it gets clogged. When it gets overheated, it won’t turn on.

Solution: Ensure you empty your vacuum from time to time. It can save you lots of stress.

Faulty Motor

There could also be a case of a faulty motor. The motor is the powerhouse of the vacuum.  Once it has a fault, your shark vacuum won’t turn on. Some of the known causes of a faulty motor are tied to the manufacturers. Therefore, when fixing this, ensure you hire an expert to do this.

Solution: This can be fixed when the fault is traced, and it gets repaired or the motor itself is replaced.

Broken Belt

A broken belt can occur due to the wear and tear caused by prolonged use of the vacuum. With the constant spinning of the vacuum, the belt can sometimes get broken in the process of using it. When the belt is damaged or faulty, it will cause the brush roll to stop spinning. This will lead to a total breakdown of the vacuum and your vacuum won’t turn on. 

Solution: The easiest way out of this is to replace the old belt with a new one. This, of course, should be done by a trusted vacuum expert. 

Dirty Filter

Your shark vacuum won’t turn on when the HEPA filter is dirty. Dirt’s reduce the suction power of your vacuum and your shark vacuum won’t turn on when this happens.

Solution: By emptying the HEPA filter in the vacuum cleaner, your shark vacuum will turn on. You can do this yourself by hitting the filter against a hard surface to dust off the dirt. 

Factory Reset Setting

You should use this when your shark robot vacuum won’t turn on. Your robot vacuums may have glitches at some point. The good news is that it can be resolved.

Solution: There are two ways of resolving this technical hitch. You can log in to the app and request a request. However, the app may not resolve this issue. You can easily do this by pressing the power button for about 10 seconds till it starts again.

Tips For Keeping Your Vacuum Running

Your vacuum is the appliance you want to suck. So when you turn it on, and it doesn’t do anything, it can be frustrating. Follow these simple maintenance tips to get the most out of your Shark vacuum.

• Clean out and dump the dust and debris container after every use. 
• Regularly clean the filters and replace them as needed.
• Check the motorized brush and wheels weekly for strings, tangled hair, and other possible obstructions.
• Inspect any hoses on your vacuum every few weeks for clogs or blockages.
• Don’t vacuum over the power cord or yank it out of the outlet.
• Keep the contacts on the battery and charger of robot vacuums clean and clear.

FREQUENTLY ASKED QUESTIONS (FAQs)

Here are some frequently asked questions Shark Vacuum users ask:

• Why does my Shark Vacuum keep overheating? 

Overheating can be caused by a clogged filter, a full dustbin, or a blockage in the hose or brush roll. Make sure to clean the filters, empty the dustbin regularly, and check for any blockages in the hose or brush roll.

• What should I do if my Shark Vacuum has low suction? 

Low suction can be caused by a damaged or deteriorating hose, a clogged filter, or a blockage in the hose or brush roll. Check the hoses for any cracks or splits, clean the filters and remove any blockages in the hose or brush roll.

•  Can I fix my Shark Vacuum myself? 

Yes, you can try to fix your Shark Vacuum yourself by following the troubleshooting steps provided by the manufacturer or online guides. However, if the problem persists, it’s best to contact Shark Customer Service for assistance.

Read Also: American made vacuum cleaner

CONCLUSION

As a vacuum owner, learn to go through the manufacturer’s guide before using any vacuum. Reading through the leaflet can save you a lot of stress. 

Shark vacuums are excellent models. You can only enjoy them when you learn to maintain them the proper way. Otherwise, your vacuum might develop a fault before the warranty period. Learn to handle it with care. 

In the case of any fault, you should be able to fix smaller issues. Whereas, bigger issues require the attention of a trusted vacuum specialist. You can call their support centre for more clarification.